Description
CPU
• Supports 6th Gen Intelr CoreÖ i3/i5/i7 processors, and Intelr Pentiumr and Celeronr processors for Socket LGA1151
* Please refer to CPU Support for compatible CPU; the above description is for reference only.

Chipset
• Intelr H110 Chipset

Main Memory
• 2 x DDR4 memory slots, support up to 32GB
– Supports DDR4 2133 MHz
• Dual channel memory architecture
• Supports Non-ECC, un-buffered memory
• Supports Intelr Extreme Memory Profile (XMP)
* Hyper DIMM support is subject to the physical characteristics of individual CPUs
* DDR4 2133 MHz and higher memory modules will only run at maximum of DDR4 2133 MHz on XMP mode due to Intelr chipset limitation
* Please refer to Compatibility reports for more information of compatible memory.


• 1 x PCIe 3.0 x16 slot
• 2 x PCIe 2.0 x1 slots


• 1 x HDMIÖ ports, support a maximum resolution of 4096×2160@24Hz, 2560×1600@60Hz
– Support for HDMIÖ 1.4 version.
• 1 x VGA port, supports a maximum resolution of 2048×1536@50Hz, 2048×1280@60Hz, 1920×1200@60Hz

On-Board SATA
• Intelr H110 Chipset
• 4 x SATA 6Gb/s ports

USB
• Intelr H110 Chipset
– 4 x USB 3.1 Gen1 (SuperSpeed USB) ports (2 ports on the back panel, 2 ports available through the internal USB connector)
– 6 x USB 2.0 (High-speed USB) ports (2 ports on the back panel, 4 ports available through the internal USB connectors)


• Realtekr ALC887 Codec
• 7.1-Channel High Definition Audio

LAN
• 1 x Realtek RTL8111H Gigabit LAN controller

Back Panel I/O Ports
– 1 x PS/2 mouse port
– 1 x PS/2 keyboard port
– 2 x USB 2.0 ports
– 2 x USB 3.1 Gen1 ports
– 1 x HDMIÖ port
– 1 x VGA port
– 1 x LAN (RJ45) port
– 3 x audio jacks

Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 4-pin ATX 12V power connector
– 4 x SATA 6Gb/s connectors
– 2 x USB 2.0 connectors (supports additional 4 USB 2.0 ports)
– 1 x USB 3.1 Gen1 connector (supports additional 2 USB 3.1 Gen1 ports)
– 1 x 4-pin CPU fan connector
– 1 x 4-pin system fan connectors
– 1 x Front panel audio connector
– 2 x Front panel connectors
– 1 x TPM module connector
– 1 x Serial Port connector
– 1 x Chassis Intrusion connector
– 1 x Clear CMOS jumper

Dimension
• 8.9 in. x 6.8 in. (22.6 cm x 17.3 cm) Micro-ATX Form Factor


• 6 mounting holes
Reviews
There are no reviews yet.